Kpsi Level Transducer User's Manual
- Kpsi Level Transducer User's Manual 2017
- Kpsi Transducer Dealer
- Kpsi Level Transducer User's Manual Diagram
- Kpsi Level Transducer User's Manual Download
- Kpsi Level Transducer User's Manual Guide
- Esterline Kpsi Level Transducer
Pressure Systems, Inc. Series 500 User’s Manual©-3-www.PressureSystems.com 3.0 Cabling and Wiring Most installations using the Series 500 transducer connect our polyurethane or Tefzel® cable to a junction box. From this junction box, users run their own cable to the required instrumentation.
Of a sealed gauge transducer is 4 mA at 14.70 psia. Before ordering a sealed gauge transducer, the customer should determine the altitude (above sea level) of the installation and inform Customer Service of this value before order entry. During manufacture, the output of the transducer will be adjusted to compensate for the altitude. Pressure Systems, Inc. KPSI™ Level and Pressure Transducers User’s Manual i www.PressureSystems.com Our Company Pressure Systems is an ISO9001:2000 certified U.S. Manufacturer of submersible and non-submersible (above ground) pressure transducers for environmental, industrial and municipal applications. Pressure Systems, Inc. KPSI™ Level and Pressure Transducers User’s Manual i www.PressureSystems.com Our Company Pressure Systems is an ISO9001:2000 certified U.S. Manufacturer of submersible and non-submersible (above ground) pressure transducers for environmental, industrial and municipal applications. Pressure & Liquid Level Measurement Users Manual - 2 - Example DOM: (The DOM is located on each transducer/transmitter housing) DOM: 9914 99 is the last two digits of the year of manufacture (1999) 14 is the week of manufacture (14th week of 52 week year). Pressure and Temperature Transducer User’s Manual 7 Power Supply The PTX requires voltage supplied to be within the range of the DeviceNet standard, which states: 24 volts ±1% or adjustable to 0.2%. Use of a lower voltage network power supply will decrease the reliability of the network and may make it inoperable.
Perfect for Sludge and Slurries, Lightning Protected, Intrinsically Safe
PBLT2 and PBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids.
The PBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightningground strike transients (surge protection is not guaranteed and is not covered by warranty). The PBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier.
Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmosphericpressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer. Cateye velo 8 instruction manual.
DID YOU KNOW that you can add YOUR logo to our PBLT2/PBLTX Transmitter, call customer service for details.
Product Applications
- Wastewater
- Sludge pits, clarifiers, digesters
- Alum tanks
- Chemical storage tanks
- Oil tanks
- Lime slurry
- Sumps
- Reservoirs
- Service:
- Compatible liquids.
- Wetted Materials:
- Body: 316 SS, 316L SS; Cable: Polyether polyurethane or ETFE; Seals: Fluoroelastomer.
- Accuracy:
- ±0.25% FS (includes linearity, hysteresis, and repeatability).
- Temperature Limit:
- PBLT2: 0 to 200°F (-18 to 93°C); PBLTX: ETFE -4 to 176°F(-20 to 80°C); Polyurethane: -4 to 149°F (-20 to 65°C)
- Compensated Temperature Range:
- PBLT2: 0 to 180°F (-18 to 82°C), PBLTX: 0 to 176°F (-18 to 80°C).
- Thermal Effect:
- ±0.02% FS/°F.
- Pressure Limit:
- 2X FS.
- Power Requirement:
- PBLT2: 13 to 30 VDC, PBLTX: 10 to 28 VDC.
- Output Signal:
- 4 to 20 mA DC, two wire.
- Response Time:
- 50 msec.
- Loop Resistance:
- 900 Ω.
- Electrical Connection:
- Wire pigtail.
- Mounting Orientation:
- Suspended in tank below level being measured.
- Electrical Protection:
- PBLT2: Lightning and surge protection, PBLTX: none.
- Weight:
- 4.3 lb (2.0 kg).
- Agency Approvals:
- PBLT2: CE, PBLTX: CE, cULus intrinsically safe for ClassI, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; Class III, Div. 1.(According to control drawing 001833-44)*
- *Up to 196 ft (59.5 m) for ETFE cable; Up to 333 ft (101.5 m) for polyurethane cable.
- Durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids
- Incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty) on PBLT2 models
- Maintenance free filter eliminates particulate or water droplets from entering the transducer
- UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with the proper barrier
- 270 lb (122.5 kg) tensile strength shielded and vented cable
- Excellent chemical compatibility
- NPT connection allows the unit to be rigidly installed in a pipe/conduit, or the addition of a A-625 hanging loop for attaching a chain for pulling out of the installation
- -Intrinsically Safe Approval - Change model number from PBLT2 to PBLTX.
- -Custom Ranges or Cable Lengths.
Kpsi Level Transducer User's Manual 2017
| Model Number | Description |
|---|---|
| MTL7706 | Intrinsically safe zener barrier. |
| A-297 | Dessicant Vent Filter for submersible level transmitters |
| A-625 | Lift Loop/Hanger for submersible level transmitters |
| MTL5541 | Galvanic barrier |
PBLT2 SUBMERSIBLE LEVEL TRANSMITTER LAST REVISED: 12-08-16
PBLT2-XX-XX-OPT PBLT2 SUBMERSIBLE LEVEL TRANSMITTER
1ST SYMBOL (1ST X) SENSOR (DECIMALS ALLOWED)
? SENSOR RANGE
5-145 PSI OR 3.5-100 METERS
2ND SYMBOL (2ND X) SENSOR UNITS
SENSOR RANGE IN PSI IF BLANK
M SENSOR RANGE IN METERS
2RD SYMBOL (3RD X) CABLE LENGTH
? 10-2000 FT OR 3-600 METERS
4TH SYMBOL (4TH X) CABLE UNITS (WHOLE NUMBERS ONLY)
CABLE LENGTH IN FEET IF BLANK
M CABLE LENGTH IN METERS
OPTIONS (OPT) KITS
-PU POLYURETHANE CABLES (STD IS ETFE)
-2YR 2 YEAR WARRANTY
-LSP LIGHTNING SURGE PROTECTION GUARANTEE 2YR
DWYER INSTRUMENTS, INC. CONFIGURATOR HELP FILE
PBLTX SUBMERSIBLE LEVEL TRANSMITTER LAST REVISED: 12-08-16
PBLTX-X-X-OPT PBLTX SUBMERSIBLE LEVEL TRANSMITTER
(INTRINSICALLY SAFE APPROVAL)
1ST SYMBOL (1ST X) SENSOR (DECIMALS ALLOWED)
? SENSOR RANGE
5-145 PSI OR 3.5-100 METERS
2ND SYMBOL (2ND X) SENSOR UNITS
SENSOR RANGE IN PSI IF BLANK
M SENSOR RANGE IN METERS
3RD SYMBOL (3RD X) CABLE LENGTH
? 10-195 FT ETFE OR 10-330 FT PU
3-59 METERS ETFE OR 3-100 METERS PU
4TH SYMBOL (4TH X) CABLE UNITS (WHOLE NUMBERS ONLY)
CABLE LENGTH IN FEET IF BLANK
M CABLE LENGTH IN METERS
OPTIONS (OPT) KITS
-PU POLYURETHANE CABLE (STD IS ETFE)
-2YR 2 YEAR WARRANTY
Manuals
Catalog Pages
Product Data Sheet
- Series MBLT
- Series SBLT2 & SBLTX
Kpsi Transducer Dealer
Kpsi Level Transducer User's Manual Diagram
- Series PBLT2 & PBLTX
Kpsi Level Transducer User's Manual Download
- Series MBLT
- Series MPCJR Pump Controller
- Model LDL2-030 Vented Water Level Data Logger
Kpsi Level Transducer User's Manual Guide
Click here to login to your account.