140 Noe 771 11 User Manual
There's also a secondary 8-megapixel camera in the front for selfie lovers. Another major features included is the 21-megapixel rear-facing camera that offers PDAF (phase detection autofocus) and dual-tone flash. The Idol 4S packs a large 5.5-inch AMOLED display that supports full HD (1080p) resolution and features 2.5D glass finish on the front and back. On the inside, Alcatel's new Windows 10 handset features a 2.15GHz quad-core Qualcomm Snapdragon 820 processor, coupled with 4GB of RAM and 64GB of storage, expandable via microSD card.
Thread StarterInstallation Perform the following steps to install a 140 NOE 771 xx module: Additional Information For complete information concerning the 140 NOE 771 xx modules, please obtain a copy of the Quantum NOE 771 xx Ethernet Modules User Guide (840 USE 116 0X) from your distributor or local sales office. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
140 Noe 771 10 User Manual
Abc
I'm trying to setup communications between plc and a network switch (the switch is on a particular noetwork at our site)
I'm using a NOE 771 11 (modicon quantum card) and the CPU is a 130 CPU 113 03S. There are a few input and out put cards on the same rack.
the connection from the network to NOE is made using a combination of fibre/media converter and cat6, the distance between the too is about 500mts approx, the issue i m having is on the NOE it shows a fault and the Run flashes 3 times which on the manual says no link or damaged cable in the connection, i have unplugged the cat6 from the now and hooked it into a laptop, i have tried pinging other Noes on the network for other PLC's and im able to do so, i have also gone the other way round and pinged this laptop from another machine, this tells me that the connection is good however the NOE run flashes 3 times hence status there is a problem with the link
We use concept program and i have changed the config extensions under Ethernet I/Oscanner
Internet address
10.218.64.146
gateway 10.218.64.254
subnet 255.255.255.128
Frame type Ethernet 2
Master module slot Slot 7 140 NOE 771-01
the subnet and gateway is same to that of the network, the fact that when i have a laptop connected on that end tells me that there is no issues with IP and gateway etc
i have tried changing the NOE card out and there's been no change
I think there is some other setting which i'm unaware of what to change
this plc is not linked or not talking to any other plc so no need for any comms blocks in concept
Done a full download on the plc
i might try changing out the CPU to a newer one but any other ideas that you guys may have would me much appreciated, Thanks
140 Noe 771 11 User Manual Pdf
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the. Quantum 140 NOE 771 -00, -01, -10, -11 Read Me. (For more information refer to the latest version of the Concept for Quantum User Manual (840 USE 428 0X). Derived Default. A copy of the Quantum NOE 771 xx Ethernet Modules User Guide (840 USE 116 0X) from your distributor or local sales office.
